NAME
    Locale::Codes - a distribution of modules to handle locale codes

DESCRIPTION
    Locale-Codes is a distribution containing a set of modules designed to
    work with sets of codes which uniquely identify something. For example,
    there are codes associated with different countries, different
    currencies, different languages, etc. These sets of codes are typically
    maintained in some standard.

    This distribution provides a way to work with these lists of codes.
    Because the data from the various standards is not available in any sort
    of consistent API, access to the lists is not available in any direct
    fashion. To compensate for this, the list of codes is stored internally
    within this distribution, and the distribution is updated on a regular
    basis to include all known codes at that point in time. This does mean
    that it is necessary to keep this distribution up-to-date to keep up
    with the various changes that are made in the various standards.

    Traditionally, a module has been created to work with each type of code
    sets. So, there is a module for working with country lists, one for
    currency lists, etc. Since version 3.00, all of these individual modules
    were written as wrappers around a central module (which was not intended
    to be used directly) which did all of the real work.

    Starting with version 3.50, the central module was reworked slightly to
    provide an object-oriented interface. All of the modules for working
    with individual types of code sets were reworked to use the improved OO
    module, so the traditional interfaces still work as they always have. As
    a result, you are free to use the traditional functional (non-OO)
    interfaces, or to use the OO interface and bypass the wrapper modules
    entirely.

    Both methods will be supported in the future, so use the one that is
    best suited to your needs.

    Within each type, any number of code sets are allowed. For example, sets
    of country codes are maintained in several different locations including
    the ISO-3166 standard, the IANA, and by the United Nations. The lists of
    countries are similar, but not identical. Multiple code sets are
    supported, though trying to convert from one code set to another will
    not always work since the list of countries is not one-to-one.

    All data in all of these modules comes directly from the original
    standards (or as close to direct as possible), so it should be
    up-to-date at the time of release.

    I plan on releasing a new version several times a year to incorporate
    any changes made in the standards. However, I don't always know about
    changes that occur, so if any of the standards change, and you want a
    new release sooner, just email me and I'll get one out.

SYNOPSIS (OBJECT-ORIENTED INTERFACE)
       use Locale::Codes;
       or
       use Locale::Codes ':constants';

       $obj = new Locale::Codes 'country';

OBJECT-ORIENTED METHODS
    The following methods are available.

    In all methods, when specifying a code set, the name (as a string) is
    always available.

    Traditionally, you could also use a perl constant to specify the code
    set. In order to do so with the OO interface, you have to import the
    constants. To do that, load the module with:

       use Locale::Codes ':constants';

    new ( [TYPE [,CODESET]] )
           $obj = new Locale::Codes;
           $obj = new Locale::Codes 'country';
           $obj = new Locale::Codes 'country','alpha-3';
           $obj = new Locale::Codes 'country',LOCALE_COUNTRY_ALPHA_3;

        This creates a new object that can access the data. If no type is
        specified (in the first argument), you must use the type method
        described below. No operations will work unless the type is
        specified.

        The second argument is the default code set to use. This is
        optional, as each type has a default code set. The default code set
        can be set using the codeset method below.

        The last example is only available if the constants were imported
        when the module was loaded.

    show_errors ( FLAG )
           $obj->show_errors(1);
           $obj->show_errors(0);

        By default, error messages will be produced when bad data is passed
        to any method. By passing in '0', these will be turned off so that
        all failures will be silent.

    type ( TYPE )
           $obj->type($type)

        This will set the type of codes that will be worked with. $type may
        be any of the recognized types of code sets, including:

           country
           language
           currency
           script
           etc.

        The list of valid types, and the code sets supported in each, are
        described in the Locale::Codes::Types document.

        This method can be called any number of times to toggle between
        different types of code sets.

    codeset ( CODESET )
           $obj->codeset($codeset);

        This sets the default code set to use. The list of code sets
        available for each type are described in the Locale::Codes::Types
        document.

        In all other methods below, when an optional CODESET argument is
        omitted, it will default to this value.

    code2name ( CODE [,CODESET] [,'retired'] )
           $name = $obj->code2name($code [,$codeset] [,'retired']);

        This functions take a code and returns a string which contains the
        name of the element identified. If the code is not a valid code in
        the CODESET specified then "undef" will be returned.

        The name of the element is the name as specified in the standard,
        and as a result, different variations of an element name may be
        returned for different values of CODESET.

        For example, the alpha-2 country code set defines the two-letter
        code "bo" to be "Bolivia, Plurinational State of", whereas the
        alpha-3 code set defines the code 'bol' to be the country "Bolivia
        (Plurinational State of)". So:

           $obj->code2name('bo','alpha-2');
              => 'Bolivia, Plurinational State of'

           $obj->code2name('bol','alpha-3');
              => 'Bolivia (Plurinational State of)'

        By default, only active codes will be used, but if the string
        'retired' is passed in as an argument, both active and retired codes
        will be examined.

    name2code ( NAME [,CODESET] [,'retired'] )
           $code = $obj->name2code($name [,$codeset] [,'retired']);

        This function takes the name of an element (or any of it's aliases)
        and returns the code that corresponds to it, if it exists. If NAME
        could not be identified as the name of one of the elements, then
        "undef" will be returned.

        The name is not case sensitive. Also, any known variation of a name
        may be passed in.

        For example, even though the country name returned using 'alpha-2'
        and 'alpha-3' country codes for Bolivia are different, either
        country name may be passed in since for each code set (in addition
        to the more common alias 'Bolivia'). So:

           $obj->name2code('Bolivia, Plurinational State of','alpha-2');
              => bo

           $obj->name2code('Bolivia (Plurinational State of)','alpha-2');
              => bo

           $obj->name2code('Bolivia','alpha-2');
              => bo

        By default, only active names will be used, but if the string
        'retired' is passed in as an argument, both active and retired names
        will be examined.

    code2code ( CODE [,CODESET] ,CODESET2 )
           $code = $obj->code2code($code [,$codeset] ,$codeset2);

        This function takes a code from one code set (CODESET or the default
        code set), and returns the corresponding code from another code set
        (CODESET2). CODE must exists in the code set specified by CODESET
        and must have a corresponding code in the code set specified by
        CODESET2 or "undef" will be returned.

           $obj->code2code('fin','alpha-3','alpha-2');
              => 'fi'

        Note that this function does NOT support retired codes.

    all_codes ( [CODESET] [,'retired'] )
           @code = $obj->all_codes([$codeset] [,'retired']);

        This returns a list of all code in the code set. The codes will be
        sorted.

        By default, only active codes will be returned, but if the string
        'retired' is passed in as an argument, both active and retired codes
        will be returned.

    all_names ( [CODESET] [,'retired'] )
           @name = $obj->all_names([$codeset] [,'retired']);

        This method returns a list of all elements names for which there is
        a corresponding code in the specified code set.

        The names returned are exactly as they are specified in the
        standard, and are sorted.

        Since not all elements are listed in all code sets, the list of
        elements may differ depending on the code set specified.

        By default, only active names will be returned, but if the string
        'retired' is passed in as an argument, both active and retired names
        will be returned.

    The following additional methods are available and can be used to modify
    the code list data (and are therefore not generally useful).

    rename_code ( CODE ,NEW_NAME [,CODESET] )
           $flag = $obj->rename_code($code,$new_name [,$codeset]);

        This method can be used to change the official name of an element.
        At that point, the name returned by the "code2name" method would be
        NEW_NAME instead of the name specified in the standard.

        The original name will remain as an alias.

        For example, the official country name for code 'gb' is 'United
        Kingdom'. If you want to change that, you might call:

           $obj->rename_code('gb', 'Great Britain');

        This means that calling code2name('gb') will now return 'Great
        Britain' instead of 'United Kingdom'.

        If any error occurs, a warning is issued and 0 is returned. An error
        occurs if CODE doesn't exist in the specified code set, or if
        NEW_NAME is already in use but for a different element.

        If the method succeeds, 1 is returned.

    add_code ( CODE ,NAME [,CODESET] )
           $flag = $obj->add_code($code,$name [,$codeset]);

        This method is used to add a new code and name to the data.

        Both CODE and NAME must be unused in the data set or an error occurs
        (though NAME may be used in a different data set).

        For example, to create the fictitious country named "Duchy of Grand
        Fenwick" with codes "gf" and "fen", use the following:

           $obj->add_code("fe","Duchy of Grand Fenwick",'alpha-2');
           $obj->add_code("fen","Duchy of Grand Fenwick",'alpha-3');

        The return value is 1 on success, 0 on an error.

    delete_code ( CODE [,CODESET] )
           $flag = $obj->delete_code($code [,$codeset]);

        This method is used to delete a code from the data.

        CODE must refer to an existing code in the code set.

        The return value is 1 on success, 0 on an error.

    add_alias ( NAME ,NEW_NAME )
           $flag = $obj->add_alias($name,$new_name);

        This method is used to add a new alias to the data. They do not
        alter the return value of the "code2name" function.

        NAME must be an existing element name, and NEW_NAME must be unused
        or an error occurs.

        The return value is 1 on success, 0 on an error.

    delete_alias ( NAME )
           $flag = $obj->delete_alias($name);

        This method is used to delete an alias from the data. Once removed,
        the element may not be referred to by NAME.

        NAME must be one of a list of at least two names that may be used to
        specify an element. If the element may only be referred to by a
        single name, you'll need to use the "add_alias" method to add a new
        alias first, or the "remove_code" method to remove the element
        entirely.

        If the alias is used as the name in any code set, one of the other
        names will be used instead. Predicting exactly which one will be
        used requires you to know the order in which the standards were
        read, which is not reliable, so you may want to use the
        "rename_code" method to force one of the alternate names to be used.

        The return value is 1 on success, 0 on an error.

    replace_code ( CODE ,NEW_CODE [,CODESET] )
           $flag = $obj->replace_code($code,$new_code [,$codeset]);

        This method is used to change the official code for an element. At
        that point, the code returned by the "name2code" method would be
        NEW_CODE instead of the code specified in the standard.

        NEW_CODE may either be a code that is not in use, or it may be an
        alias for CODE (in which case, CODE becomes and alias and NEW_CODE
        becomes the "real" code).

        The original code is kept as an alias, so that the "code2name"
        routines will work with either the code from the standard or the new
        code.

        However, the "all_codes" method will only return the codes which are
        considered "real" (which means that the list of codes will now
        contain NEW_CODE, but will not contain CODE).

    add_code_alias ( CODE ,NEW_CODE [,CODESET] )
           $flag = $obj->add_code_alias($code,$new_code [,$codeset]);

        This method adds an alias for the code. At that point, NEW_CODE and
        CODE will both work in the "code2name" method. However, the
        "name2code" method will still return the original code.

    delete_code_alias ( CODE [,CODESET] )
        These routines delete an alias for the code.

        These will only work if CODE is actually an alias. If it is the
        "real" code, it will not be deleted. You will need to use the
        "rename_code" method to switch the real code with one of the
        aliases, and then delete the alias.

TRADITIONAL INTERFACES
    In addition the the primary OO module, the following modules are
    included in the distribution for the traditional way of working with
    code sets.

    Each module will work with one specific type of code sets.

    Locale::Codes::Country, Locale::Country
        This includes support for country codes (such as those listed in
        ISO-3166) to specify the country.

        Because this module was originally distributed as Locale::Country,
        it is also available under that name.

    Locale::Codes::Language, Locale::Language
        This includes support for language codes (such as those listed in
        ISO-639) to specify the language.

        Because this module was originally distributed as Locale::Language,
        it is also available under that name.

    Locale::Codes::Currency, Locale::Currency
        This includes support for currency codes (such as those listed in
        ISO-4217) to specify the currency.

        Because this module was originally distributed as Locale::Currency,
        it is also available under that name.

    Locale::Codes::Script, Locale::Script
        This includes support for script codes (such as those listed in
        ISO-15924) to specify the script.

        Because this module was originally distributed as Locale::Script, it
        is also available under that name.

    Locale::Codes::LangExt
        This includes support for language extension codes (such as those
        listed in the IANA language registry) to specify the language
        extension.

    Locale::Codes::LangVar
        This includes support for language variation codes (such as those
        listed in the IANA language registry) to specify the language
        variation.

    Locale::Codes::LangFam
        This includes support for language family codes (such as those
        listed in ISO 639-5) to specify families of languages.

    In addition to the modules above, there are a number of support modules
    included in the distribution. Any module not listed above falls into
    that category.

    These modules are not intended to be used by programmers. They contain
    functions or data that are used by the modules listed above. No support
    of any kind is offered for using these modules directly. They may be
    modified at any time.

COMMON ALIASES
    As of version 2.00, the modules supported common variants of names.

    For example, Locale::Country supports variant names for countries, and a
    few of the most common ones are included in the data. The country code
    for "United States" is "us", so:

       country2code('United States');
         => "us"

    Now the following will also return 'us':

       country2code('United States of America');
       country2code('USA');

    Any number of common aliases may be included in the data, in addition to
    the names that come directly from the standards. If you have a common
    alias for a country, language, or any other of the types of codes, let
    me know and I'll add it, with some restrictions.

    For example, the country name "North Korea" never appeared in any of the
    official sources (instead, it was "Korea, North" or "Korea, Democratic
    People's Republic of". I would honor a request to add an alias "North
    Korea" since that's a very common way to specify the country (please
    don't request this... I've already added it).

    On the other hand, a request to add Zaire as an alias for "Congo, The
    Democratic Republic of" will not be honored. The country's official name
    is no longer Zaire, so adding it as an alias violates the standard.
    Zaire was kept as an alias in versions of this module prior to 3.00, but
    it has been removed. Other aliases (if any) which no longer appear in
    any standard (and which are not common variations of the name in the
    standards) have also been removed.

RETIRED CODES
    Occasionally, a code is deprecated, but it may still be desirable to
    have access to it.

    Although there is no way to see every code that has ever existed and
    been deprecated (since most codesets do not have that information
    available), as of version 3.20, every code which has ever been included
    in these modules can be referenced.

    For more information, refer to the documentation on the code2name,
    name2code, all_codes, and all_names methods above.

SEE ALSO
    Locale::Codes::Types
        The list of all code sets available for each type.

    Locale::Codes::Changes
        A history of changes made to this distribution.

KNOWN BUGS AND LIMITATIONS
    Relationship between code sets
        Because each code set uses a slightly different list of elements,
        and they are not necessarily one-to-one, there may be some confusion
        about the relationship between codes from different code sets.

        For example, ISO 3166 assigns one code to the country "United States
        Minor Outlying Islands", but the IANA codes give different codes to
        different islands (Baker Island, Howland Island, etc.).

        This may cause some confusion... I've done the best that I could do
        to minimize it.

    Non-ASCII characters not supported
        Currently all names must be all ASCII. I plan on relaxing that
        limitation in the future.

BUGS AND QUESTIONS
    If you find a bug in Locale::Codes, there are three ways to send it to
    me. Any of them are fine, so use the method that is easiest for you.

    Direct email
        You are welcome to send it directly to me by email. The email
        address to use is: sbeck@cpan.org.

    CPAN Bug Tracking
        You can submit it using the CPAN tracking too. This can be done at
        the following URL:

        <http://rt.cpan.org/Public/Dist/Display.html?Name=Locale-Codes>

    GitHub
        You can submit it as an issue on GitHub. This can be done at the
        following URL:

        <https://github.com/SBECK-github/Locale-Codes>

    Please do not use other means to report bugs (such as forums for a
    specific OS or Linux distribution) as it is impossible for me to keep up
    with all of them.

    When filing a bug report, please include the following information:

    Locale::Codes version
        Please include the version of Locale::Codes you are using. You can
        get this by using the script:

           use Locale::Codes;
           print $Locale::Codes::VERSION,"\n";

    If you want to report missing or incorrect codes, you must be running
    the most recent version of Locale::Codes.

    If you find any problems with the documentation (errors, typos, or items
    that are not clear), please send them to me. I welcome any suggestions
    that will allow me to improve the documentation.

AUTHOR
    Locale::Country and Locale::Language were originally written by Neil
    Bowers at the Canon Research Centre Europe (CRE). They maintained the
    distribution from 1997 to 2001.

    Locale::Currency was originally written by Michael Hennecke and was
    modified by Neil Bowers for inclusion in the distribution.

    From 2001 to 2004, maintenance was continued by Neil Bowers. He modified
    Locale::Currency for inclusion in the distribution. He also added
    Locale::Script.

    From 2004-2009, the module was unmaintained.

    In 2010, maintenance was taken over by Sullivan Beck (sbeck@cpan.org)
    with Neil Bower's permission. All problems or comments should be sent to
    him using any of the methods listed above.

COPYRIGHT
       Copyright (c) 1997-2001 Canon Research Centre Europe (CRE).
       Copyright (c) 2001      Michael Hennecke (Locale::Currency)
       Copyright (c) 2001-2010 Neil Bowers
       Copyright (c) 2010-2018 Sullivan Beck

    This module is free software; you can redistribute it and/or modify it
    under the same terms as Perl itself.